LE CENTER, MN, USA
N73284
Bell 47G
The pilot was spraying along a creek bed when the main rotor/transmission assembly contacted a wire which was at an altitude of about 20 feet above the terrain. The helicopter then descended to impact with the terrain.
On June 10, 1998, at 1200 central daylight time (cdt), a Bell 47G, N73284, flown by a commercial helicopter pilot collided with powerlines during an aerial application flight in Le Center, Minnesota. The pilot received serious injuries and the helicopter was destroyed. Visual meteorological conditions prevailed and no flight plan was filed for the local 14 CFR Part 137 flight. The flight originated in Le Center, Minnesota. The pilot reported that while spraying "ditch banks" the helicopter contacted a wire which was embedded in heavy vegetation. He continued to report "The wire broke & fouled the rotor blades. Then the aircraft & I hit the ground." An Inspector from the Federal Aviation Administration Minneapolis, Minnesota, Flight Standards District Office reported the pilot was spraying along a creek bed when the accident occurred. The wire which was contacted was approximately 20 feet above the terrain (creek bed) and the poles on which the wire was strung were hidden by vegetation. The inspector stated the pilot was aware of the wire, but did not see it during the swath run. He stated the wire twisted around the transmission and main rotor blades.
the pilot's failure to maintain clearance with the wire. A factor associated with the accident was the wire which the helicopter contacted.
Source: NTSB Aviation Accident Database
Aviation Accidents App
In-Depth Access to Aviation Accident Reports
