Aviation Accident Summaries

Aviation Accident Summary LAX98LA270

TUCSON, AZ, USA

Aircraft #1

N1616Z

Silvaire LUSCOMBE 8F

Analysis

Witnesses reported that the aircraft landed fast on the main wheels, began veering left off the runway, became airborne, touched down in a dirt area, became airborne again, went through a chain link fence, and collided with an occupied security truck in the Arizona Air National Guard compound. The airport was using runway 11 for takeoffs and landings. During initial contact with the Tucson Air Traffic Control Tower, the pilot had requested runway 3 for landing, and, the tower issued the requested clearance, along with the wind direction and speed of 280 degrees at 7 knots. The airframe and engine were examined following recovery with no discrepancies noted.

Factual Information

On August 18, 1998, at 1736 hours mountain standard time, a Silvaire Luscombe 8F, N1616Z, veered off runway 3 while landing at the Tucson, Arizona, International Airport. The aircraft, which was destroyed, damaged an Air National Guard (ANG) fence, and substantially damaged an ANG security truck. The commercial pilot sustained serious injuries and the driver of the truck incurred minor injuries. The aircraft was owned and operated by the pilot under the provisions of 14 CFR Part 91 of the Federal Aviation Regulations. Visual meteorological conditions prevailed and included winds from 280 degrees at 8 knots. The flight originated from Falcon Field, Mesa, Arizona at 1630. There was no flight plan filed for the personal flight. The pilot is a military aviator with the Arizona Air National Guard, stationed at the Tucson Airport, and flies the F-16. In his written report, the pilot stated that during contact with the Tucson Air Traffic Control Tower, he had requested runway 3 for landing. The tower issued the requested clearance along with the wind direction and speed, which was 280 degrees at 7 knots. He said that just before the tail wheel touched the ground, the plane veered left and he applied right rudder to no avail. He went on to state that he applied full power for a go-around, rotated the aircraft, but the engine did not respond and he was unable to make a successful climb. He clipped the fence and collided with the roof of a parked security truck behind the first row of F-16's. Witnesses reported that the aircraft landed fast on the main wheels, began veering left off the runway, became airborne, touched down in a dirt area, became airborne again, went through a chain link fence, and collided with an occupied security truck in the Arizona Air National Guard compound. Following recovery of the aircraft to a salvage facility in Phoenix, Arizona, the Safety Board examined the airframe and engine. No discrepancies were noted with the airframe. With a supply of fuel plumbed into the aircraft fuel lines at the wing root, the engine was started and found to respond to throttle inputs.

Probable Cause and Findings

The pilot's selection of the wrong runway for the wind conditions, his inadequate compensation for the existing quartering tailwind condition, and, his failure to maintain directional control.

 

Source: NTSB Aviation Accident Database

Get all the details on your iPhone or iPad with:

Aviation Accidents App

In-Depth Access to Aviation Accident Reports