FAIRBANKS, AK, USA
N45367
Cessna 177RG
The private certificated pilot was conducting several touch and go landings. On the last landing, the pilot failed to lower the landing gear, and the airplane touched down on the belly. A postaccident examination of the airplane revealed damage to an area of fuselage about 3 1/2 feet wide, and 4 feet long.
On August 30, 2001, about 1750 Alaska daylight time, a wheel-equipped Cessna 177RG airplane, N45367, sustained substantial damage during a gear-up landing at the Fairbanks International Airport, Fairbanks, Alaska. The airplane was being operated as a visual flight rules (VFR) local area personal flight when the accident occurred. The airplane was operated by the pilot. The private certificated pilot, the sole occupant, was not injured. Visual meteorological conditions prevailed. During a telephone conversation with the National Transportation Safety Board (NTSB) investigator-in-charge (IIC) on August 30, a Federal Aviation Administration (FAA) inspector, Fairbanks Flight Standards District Office (FSDO), reported that the pilot was conducting several touch and go landings to runway 1R at Fairbanks. The inspector said that on the last landing, the pilot failed to lower the landing gear, and the airplane touched down on the belly. A postaccident examination of the airplane by the FAA revealed damage to an area of fuselage about 3 1/2 feet wide, and 4 feet long.
The pilot's failure to extend the landing gear.
Source: NTSB Aviation Accident Database
Aviation Accidents App
In-Depth Access to Aviation Accident Reports
