Aviation Accident Summaries

Aviation Accident Summary DFW05CA172

Graham, TX, USA

Aircraft #1

N372NS

Garlick Helicopters Inc. OH-58A+

Analysis

After 3 hours of flying, the agricultural helicopter collided with high tension wires and impacted the ground while maneuvering during aerial application of pesticides. The 10,000-hour pilot completed spraying a pasture and was trimming the edges when the helicopter struck the wires during a pull-up maneuver. Evidence at the accident site showed that the tail boom struck the top wire of the high tension string and separated in-flight. After the tail boom separated, the helicopter descended uncontrolled to ground impact. The wires did not have fixed aerial obstruction features (orange balls, etc.) installed.

Factual Information

On June 22, 2005, approximately 0845 central daylight time, a Garlick Helicopters Inc., OH-58A+ helicopter, N372NS, registered to and operated by Northstar Helicopters, Inc., of Jasper, Texas, collided with high tension wires and impacted the ground while maneuvering during aerial application of pesticides in the vicinity of Graham, Texas. The commercial pilot, sole occupant of the helicopter, was seriously injured. Visual meteorological conditions prevailed throughout the area and a flight plan was not filed for the Title 14 Code of Federal Regulations Part 137 aerial application flight. The local flight originated at 0545 from a nearby private facility. According to the operator, the 10,000-hour pilot had completed spraying a pasture and was trimming the edges when the helicopter struck the wires during a pull-up maneuver. Examination of the helicopter by an FAA inspector, who traveled to the accident site, revealed evidence of tail boom contact with the guide of a high tension string with subsequent in-flight tail boom separation. After the tail boom separated, the helicopter descended uncontrolled to ground impact. The wires were not equipped with fixed aerial obstruction features (orange balls, etc.).

Probable Cause and Findings

The pilot's failure to maintain clearance with the wire while maneuvering during an aerial application flight. Low altitude flight is a contributing factor.

 

Source: NTSB Aviation Accident Database

Get all the details on your iPhone or iPad with:

Aviation Accidents App

In-Depth Access to Aviation Accident Reports