Eastland, TX, USA
N9364U
Cessna 150M
Same as Factual Information
The private pilot reported that during a cross-country flight, the engine rpm decreased and he applied carburetor heat. He kept the heat on for a period, and then turned it off after the rpm increased to 2500. The rpm dropped immediately to 1000 rpm, and went to 2000 rpm upon the reapplication of carburetor heat, but then decayed again. The pilot made an emergency landing at an airport, but overran the end of the runway and collided with trees. An inspection of the airplane by an FAA inspector disclosed that the carburetor heat control was not functioning properly, and that the engine fuel mixture arm was slipping on the mixture control cable. In his written report to the NTSB, the pilot indicated there were no mechanical issues with the airplane he was aware of that precipitated the accident. A carburetor icing probability chart indicated that temperature and humidity conditions in the vicinity of the accident were conducive to carburetor icing.
The partial loss of engine power for an undetermined reason during cruise flight, which resulted in a forced landing and an overrun. A factor associated with the accident was the pilot's misjudged distance/speed while landing.
Source: NTSB Aviation Accident Database
Aviation Accidents App
In-Depth Access to Aviation Accident Reports
