Lebanon, PA, USA
N321ET
SCHWEIZER 269C-1
The helicopter pilot stated that he was performing his first solo autorotation to a full landing. He began the maneuver at approximately 1000 feet, and near the ground he noticed that he had a higher than normal rate of descent. He flared late and the helicopter “settled fast”. As the helicopter touched down, the tail struck the ground resulting in substantial damage to the tail boom, tail rotor drive shaft, and tail rotor assembly. The pilot did not report any mechanical malfunctions or anomalies with the helicopter prior to the accident.
The helicopter pilot stated that he was performing his first solo autorotation to a full landing. He began the maneuver at approximately 1000 feet, and near the ground noticed that he had a higher than normal rate of decent. He flared late and the helicopter “settled fast”. As the helicopter touched down, the tail struck the ground resulting in substantial damage to the tail boom, tail rotor drive shaft, and tail rotor assembly. The pilot did not report any mechanical malfunctions or anomalies with the helicopter prior to the accident.
The pilot’s failure to arrest the helicopter descent during the simulated engine out maneuver resulting in a hard landing.
Source: NTSB Aviation Accident Database
Aviation Accidents App
In-Depth Access to Aviation Accident Reports
