Inverness, FL, USA
N43715
TAYLORCRAFT BC-12D
After an uneventful preflight inspection and flight around the local area, the private pilot returned to the departure airport to practice touch-and-go landings in the tailwheel-equipped airplane. The first two practice landings were uneventful; during the third landing roll, the pilot felt a vibration originating from the tailwheel that rapidly increased in intensity before the airplane suddenly veered to the left. The pilot attempted to compensate by applying full rudder control to the right, but the airplane continued to the left, departed the runway, struck a taxiway sign, and pitched nose down, which resulted in substantial damage to the fuselage. Postaccident examination of the airplane's tailwheel revealed that the steering mechanism components connecting the tailwheel to the rudder had disconnected. Although a spring was recovered from the runway after the accident, the remaining hardware components were not recovered. Given this information, it is likely that the tailwheel steering mechanism became disconnected at some point during the landing and ultimately resulted in the pilot's inability to maintain directional control of the airplane. Because some of the steering mechanism components were not recovered, the reason for the disconnection could not be determined.
On May 12, 2015, at 0740 eastern daylight time, a Taylorcraft BC-12D, N43715, was substantially damaged while attempting to land at Inverness Airport (INF), Inverness, Florida. The private pilot was not injured. Visual meteorological conditions prevailed, and no flight plan was filed for the local, personal flight, which was conducted under the provisions of Title 14 Code of Federal Regulations Part 91.The pilot performed a preflight inspection of the airplane before departing on the local flight with the intent of practicing touch-and-go landings. The first two practice landings were uneventful. The pilot landed the airplane in a "three point full stall" attitude during the third landing. During the landing roll, and just before the pilot intended to increase engine power to take off, he felt a vibration originating from the tailwheel that was increasing rapidly in intensity. The airplane then suddenly veered to the left. The pilot attempted to compensate by applying full rudder to the right, but the airplane continued left, departed the runway, and struck a taxiway sign. The airplane subsequently pitched forward and the nose struck the ground, resulting in substantial damage to the fuselage. A Federal Aviation Administration (FAA) inspector examined the airplane following the accident and noted the tailwheel steering linkage was disconnected from the rudder arm. The right side tailwheel spring, which attached the right side of the tailwheel steering arm to the rudder remained attached to the tailwheel. The left side spring was not attached and was recovered by the pilot from the runway. The associated hardware used to attach the spring to the rudder arm were not recovered. Review of the airplane's maintenance records revealed that the airplane's most recent annual inspection was completed on September 15, 2014. At that time the airframe had accrued 3,140 total hours of operation.
A disconnection of the tailwheel steering mechanism during landing, which resulted in the pilot’s loss of directional control.
Source: NTSB Aviation Accident Database
Aviation Accidents App
In-Depth Access to Aviation Accident Reports
