Aviation Accident Summaries

Aviation Accident Summary CEN16LA033

Gonzales, LA, USA

Aircraft #1

N2942N

CESSNA 120

Analysis

The pilot reported that the airplane was on final approach to the airport when the engine started to lose power. He applied carburetor heat and switched fuel tanks, but engine power was not restored, so he made a forced landing to a field near the airport. An examination of the wreckage found that the castellated nut that connects the throttle arm to the carburetor had backed off, which allowed the engine to go to idle, and that the nut's associated cotter pin was missing. The pilot reported that the carburetor had been replaced the day before the accident flight. The accident is consistent with the throttle arm becoming disengaged from the carburetor as a result of a missing cotter pin and the accompanying nut subsequently backing off.

Factual Information

On November 6, 2015, about 1205 central standard time, a Cessna 120 airplane, N2942N, impacted terrain shortly after departing the Louisiana Regional Airport (L38), Gonzales, Louisiana. The commercial rated pilot was seriously injured and the airplane was substantially damaged during the accident. The airplane was registered to and operated by Graham Aviation LLC, Baton Rouge, Louisiana, under the provisions of 14 Code of Federal Regulations Part 91 as a personal flight. Visual meteorological conditions prevailed at the time. The pilot reported that he had been airborne about 25 minutes and was on final approach to the runway. The engine began to lose power, so he applied carburetor heat and switched fuel tanks. The engine did not recover, so he made a forced landing in a field. The pilot added that the engine's carburetor had been replaced the day prior. The responding Federal Aviation Administration (FAA) inspector reported that the airplane had crashed in a field near the airport. A visual examination of the engine noted that fuel was present on site. The airplane came to rest upright, with the main landing gear collapsed. Heavy impact damage was noted to the airplane's fuselage. After the airplane was recovered, an examination of the wreckage was conducted by the FAA inspector. The examination found that the castellated nut holding the carburetor's throttle arm had backed off, allowing the engine to go to idle. Additionally, the nut was missing the associated cotterpin.

Probable Cause and Findings

Maintenance personnel’s improper installation of the carburetor during recent maintenance, including the omission of a required cotter pin, which resulted in a total loss of engine power.

 

Source: NTSB Aviation Accident Database

Get all the details on your iPhone or iPad with:

Aviation Accidents App

In-Depth Access to Aviation Accident Reports