Aviation Accident Summaries

Aviation Accident Summary WPR17LA100

Madera, CA, USA

Aircraft #1

N8712H

Grumman G164

Analysis

The commercial pilot reported that the tailwheel-equipped airplane veered to the left during takeoff on the fourth flight of the day. He applied full right brake and rudder to correct; however, the airplane veered off the runway and the right main landing gear separated from the airframe. The pilot stated that the wind conditions at the time of the accident included a 7 to 10 mph left quartering tailwind with occasional gusts to 12 to 14 mph. A postaccident examination of the right brake revealed no evidence of preimpact mechanical malfunctions or failures that would have precluded normal operation. The airplane incorporated a free-swivel, non-lockable tailwheel assembly; directional control on the ground was accomplished by application of differential braking until adequate airspeed was attained for the rudder to become effective. It is likely that, due to the quartering tailwind, the airplane had not yet attained an adequate airspeed for rudder effectiveness and that the pilot's braking action was insufficient to overcome the left yaw.

Factual Information

On May 7, 2017, about 1135 Pacific daylight time, a Grumman G164A, N8712H, was destroyed by post-impact fire at Madera Municipal Airport (MAE), Madera, California. The commercial pilot was not injured. The airplane was registered to and operated by Todds Aerial Spraying, LLC. under the provisions of Title 14 Code of Federal Regulations Part 137 as an aerial application flight. Visual meteorological conditions prevailed, and no flight plan was filed for the local flight, which was originating at the time of the accident. The pilot reported that he had made three aerial application flights that morning without incident. During his fourth takeoff roll on runway 30, the airplane started to veer to the left. He applied full right brake and rudder control to correct the movement to the left; however, despite his control inputs, the airplane exited the left side of the runway. The pilot stated that the throttle remained at full power as he tried to liftoff from the grassy area adjacent to the runway. Subsequently, the right main landing gear separated which resulted in the propeller and right wing striking the ground. The airplane nosed over and a post-crash fire ensued. The pilot stated that, at the time of the accident, the wind was about 7-10 miles per hour (mph) from the southeast, with occasional gusts to 12-14 mph. He also reported that the airplane had about 200 gallons of chemicals and 35 gallons of fuel on board. The airplane's original equipment manufacturer (OEM) parts design incorporated a free swivel, non-lockable tailwheel assembly. Such assembly allows directional control on the ground by applying differential braking, until adequate airspeed is attained for the rudder to become effective for directional control. A Federal Aviation Administration Inspector examined the right brake and did not find any evidence of preimpact mechanical malfunctions or failures that would have precluded normal operation. He concluded that the normal brake effectiveness was available, and the right brake was fully applied; however, that was not adequate to overcome the left yaw.

Probable Cause and Findings

The pilot’s loss of directional control during takeoff with a quartering tailwind, which resulted in a runway excursion and separation of the right landing gear.

 

Source: NTSB Aviation Accident Database

Get all the details on your iPhone or iPad with:

Aviation Accidents App

In-Depth Access to Aviation Accident Reports