Grass Valley, CA, USA
N210BG
CESSNA P210
The pilot reported that, while en route, he noticed a loose camlock screw on the engine cowling and decided to land the airplane at the nearest airport. He added that, during the landing, he applied the brakes, but they had "minimal effect." As the airplane slowed "very slightly," he determined he could make the taxiway turn. But, he added that, "the left steering did not [a]ffect direction." The airplane exited the runway and went over the runway embankment. The airplane sustained substantial damage to the left wing. The pilot reported that the brakes failed to slow the airplane to a complete stop, and the nosewheel failed to turn. A local mechanic examined the brakes following the accident and found no anomalies. The airport manager reported that marks on the runway showed that the airplane had touched down about 1,000 to 1,500 ft beyond the approach end of the runway. Additionally, there was about a 15- ft-long skid mark showing a skidding left turn before the airplane exited the runway. Pictures submitted by the Federal Aviation Administration inspector showed the skid marks turning left while exiting the end of the runway. The airport supplement stated that runway 25 sloped downhill to the west.
The pilot reported that, while enroute, he noticed a loose camlock screw on the engine cowling and decided to land the airplane at the nearest airport. He added that, during the landing, he applied the brakes, but they had "minimal effect". As the airplane slowed "very slightly", he determined he could make the taxiway turn. But, he added that, "the left steering did not effect direction", the airplane exited the runway, and went over the runway embankment. The airplane sustained substantial damage to the left wing. The pilot reported that the brakes failed to slow the airplane to a complete stop, and the nose wheel failed to turn. A local mechanic inspected the brakes following the accident and found no anomalies. The airport manager reported that, marks on the runway showed the airplane touched down approximately 1000 to 1500 ft beyond the approach end of the runway. Additionally, there was approximately a 150 ft. long skid mark showing a skidding left turn before the airplane exited the runway. Pictures submitted by the Federal Aviation Administration inspector showed the skid marks turning left while exiting the end of the runway. The airport supplement states, runway 25 slopes downhill to west.
The pilot’s improper landing flare, which resulted in a long landing and a runway excursion.
Source: NTSB Aviation Accident Database
Aviation Accidents App
In-Depth Access to Aviation Accident Reports
